ISA Backplanes, ISA/PCI Backplanes,
Enhanced ISA/PCI Backplanes, Segmented ISA/PCI
Backplanes; Hi-Tec offers a large variety of backplanes
with slot options to meet your needs.
ISA/PCI Backplane Specifications
Bus Architecture The ISA/PCI backplanes
allow the use of standard ISA Bus and PCI Local
Bus option cards. They accept standard ISA Bus
processors or PCI Industrial Manufacturers Group
(PICMG) compliant processors.
Printed Circuit Layers The backplane is a six-layer .062" thick
board. Three signal layers, +5 voltage layer,
+3.3 voltage layer, and one ground layer.
Muti-layer construction provides excellent noise
Bus Terminations Terminations provide a
method to prevent or minimize reflections and
interference on the bus. This can become a
significant factor on the ISA Bus with option
cards having non-standard load characteristics or
with long ISA Bus lengths. Installing
terminations is required only as needed by the
Power Connectors Power connection is available through one of
the following connectors: standard AT connector,
terminal block connector, 156 MTA connector.
Auxiliary Power Connector This connector provides
additional power capacity for power-intensive
Keyboard Connector Three keyboard connectors: two are 5-pin
headers and one is a standard AT 5-pin DIN
connector. These connections provide options for
front or rear-mounted keyboard connectors.
10 ISA/4 PCI
15 ISA/4PCI 19-Slot Backplane
3 ISA/3 PCI 6-Slot Backplane
5 ISA/3 PCI 8-Slot Backplane